Sprinter

Exclusively and only at HANSEN, a new edition of a classic: Stainless steel hub caps for transporter and mobile homes. We're offering something new and classic. Our new developed hub caps in an Oldstyle design. This kind of hub caps was very popular during the 70s but has been later replaced by the hub caps with a round-hole-design as it is used today. We've refined these caps now and brought them to our times. We present this classic with our well-proven fastening system in OEM quality.Have you ever aked yourself: Steel or aluminum rims?Aluminum rims are lighter than steel rims? At least that is the claim. Very often you’ll only gain a few kilograms. The essential disadvantages are often overlooked: aluminum rims are mostly very expensive and resent any kind of damages. Usal wheel covers display also no satisfactory alternative. They embrittlement very fast and appear to be grotty and cheap. The fitting is also mostly very bad.We’ve the perfect alternative for you!Highly polished hub caps made of stainless steel for transporter and mobile homes. The fitting of the hub caps is done with vehicle specific brackets (no clamp brackets) screwed under the wheel nuts of the standard steel rim.Scope of delivery:2x Wheel Caps "Retro" 16 inch (dished) (Item no. 2171)2x Wheel Caps "Retro" 16 inch (dished) (Item no. 2170)2x Mounting bracket (front axle) (Item no. 5468)2x Mounting bracket (rear axle) (Item no. 5469)Compatible withMercedes Sprinter with 16 inch twin tyresModel:W905 (2001 to 2006): 616For more than 40 years, we have been offering accessories for pickups, off-road vehicles, lorries and motorhomes from our headquarters in Germany. Benefit not only from high quality, but also from our short delivery times, various payment options and our outstanding customer service. We are available to our customers by telephone. Ask us to find out more about our products. We will be happy to help you.

Give your MB Sprinter a customised look. The mudguard extensions extend the wheel arches by 25 mm and cover our 18" rims perfectly. The supple polyurethane (PU) material adapts perfectly to the bodywork and is child's play to fit. The supple polyurethane (PU) material adapts perfectly to the bodywork and is very easy to fit with adhesive.For more than 40 years, we have been offering accessories for pickups, off-road vehicles, lorries and motorhomes from our headquarters in Germany. Benefit not only from high quality, but also from our short delivery times, various payment options and our outstanding customer service. We are available for our customers by telephone. Ask us to find out more about our products

Enhance the appearance of your vehicle with these high-quality caps and protect your wheel bolts. The plastic caps reliably protect your wheel bolts from dirt, dust, moisture, and corrosion. Extend the life of your bolts and avoid costly repairs. These precisely fitting caps are the ideal addition to any vehicle—functional, durable, and stylish. The caps are made of high-quality plastic material.Material: PP plasticColor: blackWheel bolt size: 21 mmContents: 20 piecesCompatibility:The 21 mm bolt covers fit many SUVs and passenger cars.Please measure the size of your existing wheel bolts before purchasing. Translated with DeepL.com (free version)

Frontbar made of robust, black stainless steel tube with a beefy diameter of 63 mm. Manufactured in accordance with the current EU directives on pedestrian protection. Thanks to the EC type approval included in the scope of delivery, the frontbar does not need to be entered in the vehicle documents. The document only needs to be carried on the vehicle. Please note that any assistance systems installed in the bumper (e.g. parking sensors, distance warning system, etc.), if fitted, may be impaired by the bull bar. Corresponding covers for the parking sensors are included in the scope of delivery.Suitable for the following vehicles:Manufacturer: Mercedes-BenzTrade name: SprinterVehicle type: 906 AC 35, 906 AC 30, 906 KA 30, 906 KA 35, 906 KA 50, 906 OK 35, 906 BB 30, 906 BB 35, 906 BB 50, 906 BA 30, 906 BA 35, 906 BA 50Year of construction: 2013-2017With ETG-BE no.: L765, L766, L845, L764, L844, e1*2007/46*0279*.., e1*2007/46*0301*.., e1*2007/46*0295*.., e1*2007/46*0280*.., e1*2007/46*0300*.., e1*2007/46*0299*..We have been offering off-road accessories with service and headquarters in Germany for 40 years. Ask us to find out more about our products. We will be happy to help you.

Frontbar made of robust, highly polished stainless steel tube with a beefy diameter of 63 mm. Manufactured in accordance with the current EU directives on pedestrian protection. Thanks to the EC type approval included in the scope of delivery, the frontbar does not need to be entered in the vehicle documents. The document only needs to be carried on the vehicle. Please note that any assistance systems installed in the bumper (e.g. parking sensors, distance warning system, etc.), if fitted, may be impaired by the bull bar. Corresponding covers for the parking sensors are included in the scope of delivery.Suitable for the following vehicles:Manufacturer: Mercedes-BenzTrade name: SprinterVehicle type: 906 AC 35, 906 AC 30, 906 KA 30, 906 KA 35, 906 KA 50, 906 OK 35, 906 BB 30, 906 BB 35, 906 BB 50, 906 BA 30, 906 BA 35, 906 BA 50Year of construction: 2013-2017With ETG-BE no.: L765, L766, L845, L764, L844, e1*2007/46*0279*.., e1*2007/46*0301*.., e1*2007/46*0295*.., e1*2007/46*0280*.., e1*2007/46*0300*.., e1*2007/46*0299*..We have been offering off-road accessories with service and headquarters in Germany for 40 years. Ask us to find out more about our products. We will be happy to help you.

with parking light function in white (road legal) & orange (off-road)Our Euralight grille kits have been specially developed to fit your vehicle's original radiator grille. The vehicle-specific brackets allow our BLACK PENTA LED driving lights to be precisely integrated into the radiator grille of your vehicle.BracketsThe vehicle-specific brackets are made from high-quality and stable PA6-CF using a 3D printing process. PA6-CF has a higher UV and weather resistance compared to standard ABS brackets, making PA6-CF more suitable for outdoor use. The brackets can be painted. The driving lights can be adjusted in angle and inclination via the elongated mounting holes in the brackets.BLACK PENTAThe Euralight 8” BLACK PENTA driving lights impresses with its compact design. The driving light is waterproof and dustproof and can be used in temperatures from -30°C to +60°C without any problems.Super-Bright modeThe BLACK PENTA driving lights offers you two light modes. In super-bright mode (for off-road purposes only) it achieves an incredible range of up to 906m. Switch the BLACK PENTA to E mode and use it mounted in pairs in compliance with STVZO in addition to your high beam on the vehicle. Can be used without registration thanks to ECE R149 approval. RangeThe BLACK PENTA driving lights not only impresses with its unique design, it also impresses with its first-class performance in terms of illumination and range. Over 300m at 1 lux in E mode ensure the best visibility.Impressive designThe modern and flat design of the BLACK PENTA driving lights fits perfectly with most vehicles. The parking light creates a special lighting effect.  The special coating on the aluminum housing protects against salt and dirt.HomoglationThanks to ECE R149 approval, the BLACK PENTA  (in E mode) can be used in road traffic and is registration-free. All the necessary test marks can be found on the lens. The certification also covers electromagnetic compatibility with the ECE R10 test mark, so that there is no interference with other consumers in your vehicle.ConnectionThe EURALIGHT cable kit makes connecting your new BLACK PENTA driving lights much easier. There are two 4-pin DT plugs on the end piece as counterparts to the connection plugs on the driving lights. The high beam and parking light can be operated via the two toggle switches. A 40A high-performance relay and a fuse base with a 30A plug-in fuse are also included in the wiring harness.For more than 40 years, we have been offering accessories for pickups, off-road vehicles, lorries and motorhomes from our headquarters in Germany. Benefit not only from high quality, but also from our short delivery times, various payment options and our outstanding customer service. We are available for our customers by telephone. Ask us to find out more about our products. We will be happy to help you.

Bullbar made of robust, black powder-coated stainless steel tube with a bulky diameter of 63 mm. Manufactured in accordance with the current EU guidelines on pedestrian protection. Thanks to the EC type approval included in the delivery, the bullbar does not have to be entered in the vehicle documents. The document only needs to be carried. Please note that possible assistance systems installed in the bumper (such as parking sensors, distance warning systems, etc.), if equipped, may be impaired by the front guard. Appropriate covers for the parking sensors are included in the scope of delivery.Suitable for the following vehicles:Manufacturer: Mercedes-BenzTrade name: SprinterNot suitable for vehicles with front-wheel driveVehicle type: 906 AC 30, 906 AC 35, 906 AC 35/4x4, 906BB30, 906BB35, 906BB35/4x4, 906BB50, 906BA50, 906 KA 30, 906 KA 35, KL3A4, FL3A4, KL3A5, FL3A5Year of construction: 2018-With ETG-BE no.: e1*2001/116*0353*.., e1*2001/116*0354*.., e1*2001/116*0424*.., e1*2007/46*0279*..,  e1*2007/46*0301*..,  e1*2007/46*0305*..,  e1*2007/46*00296*..,  e1*2007/46*0300*..,  e1*2007/46*0294*.., L765, L766,  e1*2007/46*1760*.., e1*2007/46*1761*.., e1*2007/46*1762*.., e1*2007/46*1763*..We have been offering off-road accessories with service and headquarters in Germany for 40 years. Ask us to find out more about our products. We will be happy to help you.

Frontbar made of robust, highly polished stainless steel tube with a beefy diameter of 63 mm. Manufactured in accordance with the current EU directives on pedestrian protection. Thanks to the EC type approval included in the scope of delivery, the frontbar does not need to be entered in the vehicle documents. The document only needs to be carried on the vehicle. Please note that any assistance systems installed in the bumper (e.g. parking sensors, distance warning system, etc.), if fitted, may be impaired by the bull bar. Corresponding covers for the parking sensors are included in the scope of delivery.Suitable for the following vehicles:Manufacturer: Mercedes-BenzTrade name: SprinterVehicle type: 906 AC 30, 906 AC 35, 906 AC 35/4x4, 906BB30, 906BB35, 906BB35/4x4, 906BB50, 906BA50, 906 KA 30, 906 KA 35, KL3A4, FL3A4, KL3A5, FL3A5Year of construction: 2018-With ETG-BE no.: e1*2001/116*0353*.., e1*2001/116*0354*.., e1*2001/116*0424*.., e1*2007/46*0279*..,  e1*2007/46*0301*..,  e1*2007/46*0305*..,  e1*2007/46*00296*..,  e1*2007/46*0300*..,  e1*2007/46*0294*.., L765, L766,  e1*2007/46*1760*.., e1*2007/46*1761*.., e1*2007/46*1762*.., e1*2007/46*1763*..We have been offering off-road accessories with service and headquarters in Germany for 40 years. Ask us to find out more about our products. We will be happy to help you.

This headlight bracket is not only a visual eye-catcher, but also serves in conjunction with auxiliary headlights (headlights shown are not included) active safety on the road. Universal fitting lamp bracket for mounting on the roof of the truck. We have also attached a sketch with the dimensions of the headlight bracket. Please check the dimensions to see if the headlight bracket will fit on your truck.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.

For the connection of e.g. daytime running lights with fog lights you also need these resistors. Our headlights are connected only on one side with the standard fog light line, the right connection side is not needed, this results in an error message displayed in your on-board computer or display. By connecting these special resistors you can mount the daytime running lights error-free on your vehicle.Suitable for vehicles with Can-Bus system!The vehicles of the newer generation are nowadays equipped with so-called Can-Bus or LIN-Bus systems, which check the light, display and turn signal function by means of a low, permanent test current. So that the installation of our daytime running lights and the omission of the standard fog lights no error message is displayed, we offer these resistors for our daytime running lights.Scope of delivery:1x resistor 55 watts / 6 ohms with a H11 plug1x resistor 50 Watt / 6 Ohm with two H11 plugsSuitable for vehicles with Can-Bus system!Cable length: 0,5mwith one waterproof 2-pin plug (H11)We have been offering off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be glad to help you.

Extremely flat light with orange lens. Very popular with US pickup drivers as a position light. But also ideal for trucks, motorhomes, vans etc. Splash-proof version. Without E-mark!The luminaire is supplied with a 12 volt plug-in bulb with a glass base. If you have a 24 volt connection, you must replace this with 24 volt. This bulb is not offered by us, but can be bought in any DIY store.