Opel Movano
Enhance the appearance of your vehicle with these high-quality caps and protect your wheel bolts. The plastic caps reliably protect your wheel bolts from dirt, dust, moisture, and corrosion. Extend the life of your bolts and avoid costly repairs. These precisely fitting caps are the ideal addition to any vehicle—functional, durable, and stylish. The caps are made of high-quality plastic material.Material: PP plasticColor: blackWheel bolt size: 21 mmContents: 20 piecesCompatibility:The 21 mm bolt covers fit many SUVs and passenger cars.Please measure the size of your existing wheel bolts before purchasing. Translated with DeepL.com (free version)
Scope of delivery:-2 pieces (2x length 1430 mm)-Can be used for the front or rear axle-25 mm (the vehicle is widened by 25 mm per mudguard / 50 mm per axle).-TÜV Süd test report (TÜV-Süd, Westendstr. 199, 80686 Munich, test report 16-00074-CP-BWG)Can be used:For vehicles without additional plastic fender flaresTÜV registration:You will receive a TÜV Süd test report from us with the delivery of the fender flares. The registration of the fender flares is not necessary, this is also stated in the report, however, we know from experience and from many customer messages that the regulatory authorities like to see such a TÜV confirmation again. Only then will there really be no trouble with the inspection service and therefore we have had a TÜV Süd report drawn up.Suitable for the following vehicles:Fiat Ducato (2006-)Citroen Jumper (2006-)Peugeot Boxer (2006-)Opel Movano (2021-)Installation:-the ambient temperature and the temperature of the components or mounting surface must be at least 20° Celsius during installation and for at least 24 hours afterwards-the surfaces on the vehicle for installation must be rust-free, smooth, thoroughly cleaned and free of grease-after removing the backing film, the fender flares must be pressed against the surface for approx. 1 minute with high and even pressure-the ends of the fender extensions can be adapted to the vehicle's appearance using a sharp carpet knife-We recommend leaving the vehicle for at least 6 hours after installation-the final strength of the adhesive joints is only achieved after 48 hours-Please do not wash the vehicle for at least 48 hours-for some widths, some mounting situations, structured surfaces or if the mounting instructions cannot be followed, additional fastening with e.g. self-tapping screws or body adhesive is requiredWe have been offering off-road accessories with service and headquarters in Germany for 40 years. Ask us to find out more about our products. We will be happy to help you.
Bullbar made of robust, black stainless steel tube with a bulky diameter of 63 mm. Manufactured in accordance with the current EU guidelines on pedestrian protection. Thanks to the EC type approval included in the delivery, the bullbar does not have to be entered in the vehicle documents. The document only needs to be carried. Please note that possible assistance systems installed in the bumper (such as parking sensors, distance warning systems, etc.), if equipped, may be impaired by the front guard. Appropriate covers for the parking sensors are included in the scope of delivery.Suitable for the following vehicles:Manufacturer: OpelTrade name: MovanoVehicle type: MR / MT / MS / MU / MW / MVyear of construction: 2020-2021ETG-BE-No.: e1*2007/46*0362*.. or *0405*.. or *0471*.. or *0472*.. or *0579*.. or *0580*..For more than 40 years, we have been offering accessories for pickups, off-road vehicles, trucks and motorhomes from our headquarters in Germany. Benefit not only from high quality, but also from our short delivery times, various payment options and our outstanding customer service. We are available for our customers by telephone. Ask us to find out more about our products. We will be happy to help you.
Bullbar made of robust, highly polished stainless steel tube with a bulky diameter of 63 mm. Manufactured in accordance with the current EU guidelines on pedestrian protection. Thanks to the EC type approval included in the delivery, the bullbar does not have to be entered in the vehicle documents. The document only needs to be carried. Please note that possible assistance systems installed in the bumper (such as parking sensors, distance warning systems, etc.), if equipped, may be impaired by the front guard. Appropriate covers for the parking sensors are included in the scope of delivery.Suitable for the following vehicles:Manufacturer: OpelTrade name: MovanoVehicle type: MR / MT / MS / MU / MW / MVyear of construction: 2020-2021ETG-BE-No.: e1*2007/46*0362*.. or *0405*.. or *0471*.. or *0472*.. or *0579*.. or *0580*..For more than 40 years, we have been offering accessories for pickups, off-road vehicles, trucks and motorhomes from our headquarters in Germany. Benefit not only from high quality, but also from our short delivery times, various payment options and our outstanding customer service. We are available for our customers by telephone. Ask us to find out more about our products. We will be happy to help you.
Bullbar made of robust, black stainless steel tube with a bulky diameter of 63 mm. Manufactured in accordance with the current EU guidelines on pedestrian protection. Thanks to the EC type approval included in the delivery, the bullbar does not have to be entered in the vehicle documents. The document only needs to be carried. Please note that possible assistance systems installed in the bumper (such as parking sensors, distance warning systems, etc.), if equipped, may be impaired by the front guard. Appropriate covers for the parking sensors are included in the scope of delivery.Suitable for the following vehicles:Manufacturer: OpelTrade name: MovanoVehicle type: Yyear of construction: 2022-2023ETG-BE-No.: e3*2007/46*0045*.. or e3*2007/46*0050*..For more than 40 years, we have been offering accessories for pickups, off-road vehicles, trucks and motorhomes from our headquarters in Germany. Benefit not only from high quality, but also from our short delivery times, various payment options and our outstanding customer service. We are available for our customers by telephone. Ask us to find out more about our products. We will be happy to help you.
Bullbar made of robust, highly polished stainless steel tube with a bulky diameter of 63 mm. Manufactured in accordance with the current EU guidelines on pedestrian protection. Thanks to the EC type approval included in the delivery, the bullbar does not have to be entered in the vehicle documents. The document only needs to be carried. Please note that possible assistance systems installed in the bumper (such as parking sensors, distance warning systems, etc.), if equipped, may be impaired by the front guard. Appropriate covers for the parking sensors are included in the scope of delivery.Suitable for the following vehicles:Manufacturer: OpelTrade name: MovanoVehicle type: Yyear of construction: 2022-2023ETG-BE-No.: e3*2007/46*0045*.. or e3*2007/46*0050*..For more than 40 years, we have been offering accessories for pickups, off-road vehicles, trucks and motorhomes from our headquarters in Germany. Benefit not only from high quality, but also from our short delivery times, various payment options and our outstanding customer service. We are available for our customers by telephone. Ask us to find out more about our products. We will be happy to help you.
Bullbar made of robust, black stainless steel tube with a bulky diameter of 63 mm. Manufactured in accordance with the current EU guidelines on pedestrian protection. Thanks to the EC type approval included in the delivery, the bullbar does not have to be entered in the vehicle documents. The document only needs to be carried. Please note that possible assistance systems installed in the bumper (such as parking sensors, distance warning systems, etc.), if equipped, may be impaired by the front guard. Appropriate covers for the parking sensors are included in the scope of delivery.Suitable for the following vehicles:Manufacturer: OpelTrade name: MovanoVehicle type: Yyear of construction: 2024-ETG-BE-No.: e3*2007/46*0045*.. or e3*2007/46*0050*..For more than 40 years, we have been offering accessories for pickups, off-road vehicles, trucks and motorhomes from our headquarters in Germany. Benefit not only from high quality, but also from our short delivery times, various payment options and our outstanding customer service. We are available for our customers by telephone. Ask us to find out more about our products. We will be happy to help you.
Bullbar made of robust, highly polished stainless steel tube with a bulky diameter of 63 mm. Manufactured in accordance with the current EU guidelines on pedestrian protection. Thanks to the EC type approval included in the delivery, the bullbar does not have to be entered in the vehicle documents. The document only needs to be carried. Please note that possible assistance systems installed in the bumper (such as parking sensors, distance warning systems, etc.), if equipped, may be impaired by the front guard. Appropriate covers for the parking sensors are included in the scope of delivery.Suitable for the following vehicles:Manufacturer: OpelTrade name: MovanoVehicle type: Yyear of construction: 2024-ETG-BE-No.: e3*2007/46*0045*.. or e3*2007/46*0050*..For more than 40 years, we have been offering accessories for pickups, off-road vehicles, trucks and motorhomes from our headquarters in Germany. Benefit not only from high quality, but also from our short delivery times, various payment options and our outstanding customer service. We are available for our customers by telephone. Ask us to find out more about our products. We will be happy to help you.
Robust, black powder coated rear footboard, made of construction steel. The slip resisdent surface will make it easier to load or unload gravity objects. The footboard gives you a secure footing with a total length of 152 cm and a depth of the footboard of 17 cm. Mounting is done to already existing mounting points, drilling is not necessary!TÜV parts certificate:Our footboards are delivered with a german TÜV parts certificate. This means that the required registration is no longer a problem.Suitable for the following vehicles:Manufacturer: OpelTrade name: MovanoVehicle type: YYear of construction: 2018-With EG-BE-No.: e3*2007/46*0045*-- oder e3*2007/46*0050*--For 40 years we have been offering off-road accessories with service and company headquarters in Germany. Ask us to find out more about our articles. We will be happy to help you.
This headlight bracket is not only a visual eye-catcher, but also serves in conjunction with auxiliary headlights (headlights shown are not included) active safety on the road. Universal fitting lamp bracket for mounting on the roof of the truck. We have also attached a sketch with the dimensions of the headlight bracket. Please check the dimensions to see if the headlight bracket will fit on your truck.We have been providing off road accessories for 40 years with service and headquarters in Germany. Ask us to learn more about our items. We will be happy to help you.