Jeep

Lifting suspension 60mm suitable for Jeep Wrangler JL 4xe Hybrid (05/2021-) incl. Geo Brackets

One of the first and most fundamental modifications to the Jeep Wrangler is always a suspension lift. Groud clearance, driving comfort, safety and other modifications such as tyres, bumpers, roof rack, etc. are always made in coordination with the suspension. This is the only way to achieve the maximum driving experience.1. Eibach suspension lift springs 60mmTo give the look and performance of your vehicle the final touch, the Eibach Pro-Lift-Kit was developed. The offered lift springs were developed in cooperation with the suspension specialists of Eibach in Germany, adapted to the European road conditions and produced exclusively for Hansen Styling Parts. 2. Bilstein B8 high-performance shock absorberDue to its extended design, the BILSTEIN B8 5100 fits perfectly with our Eibach lift springs for your Jeep Wrangler JL. The BILSTEIN monotube technology and the patented degressive vave system of the BILSTEIN B8 5100 are specially designed for these requirements. Whether on or off the road, it responds to changing road conditions without delay, providing directional stability, vehicle control and ride comfort.3. Coupling rods/stabilisersThe longer coupling rods, for the front and rear axles, keep the movement of the axle, e.g. in case of entanglement, within reasonable limits and improve driving stability considerably.4. Axle stops/Bump stopsThe axle stops, also known as bump stops, are installed within the spring travel and prevent the shock absorbers from botooming or bouncing when the wheels are submerged to the maximum extent in the wheel housing.5. Adjustable panhard bar - front axleThe reinforced adjustable panhard rod, for 2-6" lift kits, is mandatory. It ensures proper axle centering after the modification.6. Panhard bar bracket - rear axleThe panhard bar offset bracket is mounted to ensure perfect axle centering on lifted vehicles.7. Brake lineThe brake line must, normally, only be extended from approx. 3" lift on the Jeep Wrangler JL. The original brake line bracket has to be removed with our suspension lift.8. Trailing arm / Geo correction bracketGeometric correction brackets or trailing arm lowering is always useful if the caster, i.e. the angle at which the tyres are behind the vertical axis of rotation, is reduced due to the installed suspension lift. Among other things, this can cause the well-known death wobble. The geobrackets correct the angle back to the correct setting and improve th driving characteristics.We also offer this complete suspension lift kit with the geometric correction brackets in our shop!TÜV-certificateOThe delivery includes a TÜV certificate. You'll receive a suspension system that has been tested according to the current guidelines for pedestrian protection (2009/102/EWG) and is TÜV approved.The difference to other suspension systems:The springs and shock absorbers were manufactured and developed in cooperation with the suspension specialists from Eibach and Bilstein in Germany and adapted to European road conditions. The precise tuning of Eibach suspension springs and Bilstein shock absorbersreduces the uncontrolled movement of the Jeep Wrangler's high body. The approved BILSTEIN upside-down-technology ensures that the support and lateral forces are distributed over a large area and there is a significant increase in torsional rigidity in the connection between the wheel and the body. This significantly improves ride comfort on the road. The steering precision and the robustness of the vehicle are increased. This guarantees more vehicle control, safer handling as well as better traction.Vehicle:Car manufacturer: Jeep /FCATrade name: Jeep Wrangler PHEV/ Series: JLCar type: JK (only for 4-door)Year of construction: 05/2021-EG-BE-Nr.: e4*2001/116*0116*38-..Technical information:Permissible axle load: max. 1406kgTechnically possible axle load: max. 1610kgNot for vehicles with level controlNot for vehicles with the trade name Wrangler short wheelbase - 2-door model, 4-door model with combustion engine only (11/2017-05/2021) and Gladiator JT.Warranty:Installation must be proven to have been carried out by a specialist garage or suitably qualified person. No liability is accepted for damages to the vehicle caused, e.g. by incomplete installation of all components or incorrect installation.

Manufacturer: Eibach

€1,600.00 €1,829.00 (12.52% saved)

Lifting suspension 60mm suitable for Jeep Wrangler JL (2018-) 4-door incl. Geo Brackets

One of the first and most fundamental modifications to the Jeep Wrangler is always a suspension lift. Groud clearance, driving comfort, safety and other modifications such as tyres, bumpers, roof rack, etc. are always made in coordination with the suspension. This is the only way to achieve the maximum driving experience.1. Eibach suspension lift springs 60mmTo give the look and performance of your vehicle the final touch, the Eibach Pro-Lift-Kit was developed. The offered lift springs were developed in cooperation with the suspension specialists of Eibach in Germany, adapted to the European road conditions and produced exclusively for Hansen Styling Parts. 2. Bilstein B8 high-performance shock absorberDue to its extended design, the BILSTEIN B8 5100 fits perfectly with our Eibach lift springs for your Jeep Wrangler JL. The BILSTEIN monotube technology and the patented degressive vave system of the BILSTEIN B8 5100 are specially designed for these requirements. Whether on or off the road, it responds to changing road conditions without delay, providing directional stability, vehicle control and ride comfort.3. Coupling rods/stabilisersThe longer coupling rods, for the front and rear axles, keep the movement of the axle, e.g. in case of entanglement, within reasonable limits and improve driving stability considerably.4. Axle stops/Bump stopsThe axle stops, also known as bump stops, are installed within the spring travel and prevent the shock absorbers from botooming or bouncing when the wheels are submerged to the maximum extent in the wheel housing.5. Adjustable panhard bar - front axleThe reinforced adjustable panhard rod, for 2-6" lift kits, is mandatory. It ensures proper axle centering after the modification.6. Panhard bar bracket - rear axleThe panhard bar offset bracket is mounted to ensure perfect axle centering on lifted vehicles.7. Brake lineThe brake line must, normally, only be extended from approx. 3" lift on the Jeep Wrangler JL. The original brake line bracket has to be removed with our suspension lift.8. Trailing arm / Geo correction bracket (not included in the scope of delivery here)Geometric correction brackets or trailing arm lowering is always useful if the caster, i.e. the angle at which the tyres are behind the vertical axis of rotation, is reduced due to the installed suspension lift. Among other things, this can cause the well-known death wobble. The geobrackets correct the angle back to the correct setting and improve th driving characteristics.We offer this complete chassis in our store also with the Geometric Correction Brackets!TÜV-certificateOThe delivery includes a TÜV certificate. You'll receive a suspension system that has been tested according to the current guidelines for pedestrian protection (2009/102/EWG) and is TÜV approved.The difference to other suspension systems:The springs and shock absorbers were manufactured and developed in cooperation with the suspension specialists from Eibach and Bilstein in Germany and adapted to European road conditions. The precise tuning of Eibach suspension springs and Bilstein shock absorbersreduces the uncontrolled movement of the Jeep Wrangler's high body. The approved BILSTEIN upside-down-technology ensures that the support and lateral forces are distributed over a large area and there is a significant increase in torsional rigidity in the connection between the wheel and the body. This significantly improves ride comfort on the road. The steering precision and the robustness of the vehicle are increased. This guarantees more vehicle control, safer handling as well as better traction.Vehicle:Car manufacturer: Jeep /FCATrade name: Jeep Wrangler PHEV/ Series: JLCar type: JK (only for 4-door)Year of construction: 05/2021-EG-BE-Nr.: e4*2001/116*0116*38-..Technical information:Permissible axle load: max. 1406kgTechnically possible axle load: max. 1610kgNot for vehicles with level controlNot for vehicles with the trade name Wrangler short wheelbase - 2-door model, 4-door model with combustion engine only (11/2017-05/2021) and Gladiator JT.Warranty:Installation must be proven to have been carried out by a specialist garage or suitably qualified person. No liability is accepted for damages to the vehicle caused, e.g. by incomplete installation of all components or incorrect installation.

Manufacturer: Eibach

€1,400.00 €1,599.00 (12.45% saved)

Door handle surrounds plastic chromed suitable for Jeep Cherokee KL (2013-2018)

Stand out from the crowd!The covers we offer for the door handles are made of high-quality ABS chrome and are of high quality and a perfect fit. Give your vehicle a classy look. The installation can be carried out by anyone. A bodywork tape is attached to the back. This is used to stick the cover onto the existing surrounds.Mounting with 3M industrial adhesive tapeSuitable for the following vehicle:Manufacturer : FCA ChryslerDescription : Jeep Cherokee or TrailhawkType : KLYear of manufacture : 2013-2018ETG no. : e4*2007/46*0783*...For 40 years we have been offering off road accessories with service and company headquarters in Germany. Ask us to find out more about our items. We will be happy to help you.